Friday, March 09, 2007

Some Skirmish Pics For Fun







Here are some skirmish pics of some of my 15mm figs in action.

Friday, January 26, 2007

Basing the Hussars











Well . . . after an incredibly long hiatus, I'm back with the promised article on basing the Hussars. This technique was detailed by reigning 15mm expert Ian Marsh on the Wargames Journal website. I've modified it slightly, but I like the effect, so here it is.

The materials used for this project include white glue, super glue, Games Workshop Modeling Sand, Games Workshop Static Grass (no - I'm not a devotee of GW, I just like the color of the static grass, plus the sand doesn't have any "impurities" in it), acrylic paint, and bases that I purchased from RenaissanceInk.com. These bases are made from masonite, are highly durable, and don't warp over time.

The first step is to super-glue 1/2 of the figures to the cavalry bases. Once the glue is dry, white glue is diluted with water and painted onto the exposed surface of the base. The base is then dunked in the GW modeling sand and left to dry. I do 1/2 of a stand at a time because trying to get in between the horses with a brush big enough to paint glue onto the base is challenging to say the least.

Next, the other figures are super-glued to the base and allowed to dry. Once the super-glue is dry, the remaining exposed base is painted with diluted white glue and dunked in the modeling sand. The stands are allowed to dry for quite a while (these were left overnight) before anything else was done.

The next step is to find any obvious bare spots on the stands, cover the bare spots with diluted white glue, and re-dunk in the modeling sand.

Once the sand and white glue are dried, the whole stand is painted with a slightly diluted coat of Tamiya's acrylic Flat Earth (XF-52). Once that is dry, a light drybrushing of a sand color is applied (here it is Ceramcoat Maple Sugar Tan). When this is dry, a very light drybrush of a light desert color is applied (here it is Howard Hues Geo-Hex Desert).

The final step is to randomly apply spots of diluted white glue to the base and dunk it in the static grass.

After this is done, I add the cavalry standard, and the regiment is done. The final picture is one of the Hussars in a Shako British Light Cavalry division.